Search on the site
Price request

Lancets ASCENSIA MICROLET

Lancets ASCENSIA MICROLET

Price

13,440 UZS

Category:The lancets
Share:

Payment methods:

Manufacturer: ASCENSIA

Glucometer lancets are sterile needles that are installed in the lancing device. They are used to pierce the skin on the finger to take the required amount of blood for analysis.

Microlet lancets are designed specifically for use with Ascension-Microlet auto-lancing devices (supplied with Contour Plus blood glucose meters). Microlet lancets are rightfully considered one of the most painless needles for taking blood. The sample is taken in seconds, the process itself gives the user minimal discomfort.

Lancets are sterile disposable, universal, suitable for most lancing devices.

About the product

Microlet lancets are the result of the manufacturer's painstaking work. When developing, every detail was taken into account: the angle of sharpening, the thickness of the spear, the material used. To reduce the resistance of the needle when passing through the skin, each scarifier is covered with a layer of silicone a few micrometers thick. The point is sharpened on CNC machines, on which the specified parameters of the point are precisely observed.

Thanks to jewelry processing, it was possible to achieve the following advantages:

• easy, almost painless puncture, about 80% of patients feel no pain, only slight discomfort;

• after a puncture, a drop of blood is released, which is enough for analysis on glucometers Contour TC - no need to press your finger and experience pain;

• Easy to use, smooth operation when used with most lancing devices.

TECHNICAL CHARACTERISTICS AND EQUIPMENT

• Microlet lancets are made of specialized medical steel, which is characterized by reduced porosity, and therefore it can be sharpened much more accurately. Lack of pores guarantees maximum sterility;

• The thickness of the lancet is only 0.36 mm (28G). Ultra-precise sharpening with the help of laser devices made it possible to achieve perfectly correct penetration of the tip through the skin. As a result - less pain, faster healing;

• Silicone coating.

HOW TO USE?

To install the lancet in the lancing device, follow a few simple steps:

1. remove the protective cap from the piercer;

2. take a new lancet out of the package, turn the lancet tip, but do not remove it completely;

3. insert the lancet into the special lancing device holder;

4. remove the tip completely from the lancet (but do not discard);

5. Put the protective cap on the lancing device;

To make a puncture, follow a few steps:

Wash your hands beforehand, lightly rub them with a towel to improve blood circulation;

6. set the puncture depth on the piercer, 1 – minimum puncture depth, 5 – maximum puncture depth;

7. pull the shutter mechanism until a characteristic click;

8. place the lancing device on the pad of your finger (less painful fence on the side of the pad) and press the trigger;

9. After testing, cover the sharp part of the lancet with the tip, by pressing lightly.

10. Dispose of the used lancet.

Note! Microlet lancets are for single use only. After a puncture, microscopic deformations of the tip, contact with the surface and reproduction of pathogens are possible. Repeated use is not guaranteed to be sterile and can be painful to pierce, even if you are the only user of the meter and lancing device.